Paper List

In chronological/alphabetical order

P. H. da Rosa Braun, P. Shukla, K. Rezwan, M. Dreyer, M. Wilhelm; SiOC screens with aligned and adjustable pore structure for screen 1 channel liquid acquisition device, Materials MDPI, 2023, 16, 1063,

D. Dutta, N. Graupner, J. Müssig, D. Brüggemann; Assembly of rolled-up collagen constructs on porous alumina textiles, ACS Nanoscience Au, 2023.

P. Giefer, A. Kyrloglou, U. Fritsching; Impact of wettability on interface deformation and droplet breakup in microcapillaries, Physics of Fluids, 2023, Issue 35, Page 042110.

T. Guo, M. M. Murshed, K. Rezwan, M. Maas; Ceramic Open Cell Foams Featuring Plasmonic Hybrid Metal Nanoparticles for In Situ SERS Monitoring of Catalytic Reactions. Advanced Materials Interfaces n/a, 2023, 2300207.

M. Kepper, Md. N Karim, M Baune, J. Thöming, G. R. Pesch; Influence of the filter grain morphology on separation efficiency in dielectrophoretic filtration, Electrophoresis, 2023. Volume11-12,

A. Ricke, M. Sadeghi, W. Dreher; Magnetic Resonance Velocimetry for porous media: sources and reduction of measurement errors for improved accuracy, Exp. Fluids, 2023. (under review)

J. Condi Mainardi, C. Bonini Demarchi, M. Mirdrikvand, Md. N. Karim, W. Dreher, K. Rezwan, M. Maas; 3D bioprinting of hydrogel/ceramic composites with hierarchical porosity, Journal of Materials Science, 2022 57 (4): p. 1-16.
S. C. Endres, M. Avila, L. Mädler; A discrete differential geometric formulation of multiphase surface interfaces for scalable multiphysics equilibrium simulations”, Chemical Engineering Science, 2022, Vol 257, 117681,
S. C. Endres, L. Mädler; Asymmetric Three-Phase Surface Tension Forces in Agglomerating Particulate Systems, Chemie Ingenieur Technik, 2022, Volume 95, 278-283,
H. Farhandi, Md N Karim, R. SM. Almeida, K. Tushtev, K. Rezwan; Increasing the tensile strength of oxide ceramic matrix mini-composites by two-step sintering Journal of the American Ceramic Society, 2022, 105 (1).

N. C. Fontão, L. N. Ferrari, J. C. Sapatieri, K. Rezwan, M. Wilhelm; Influence of the Pyrolysis Temperature and TiO2-Incorporation on the Properties of SiOC/SiC Composites for Efficient Wastewater Treatment Applications; Membranes, 2022,

T. Guo, Md N. Karim, K. Ghosh, M. M. Murshed, K. Rezwan, M. Maas; Plasmonic porous ceramics based on zirconia-toughened alumina functionalized with silver nanoparticles for surfaces-enhanced Raman scattering, Open Ceramics, 2022, Volume 9, 100228.

Th. Ilzig, St. Günther, St. Odenbach; Combined beam hardening artifact correction and quantitative microanalysis of colloidal depositions in deep bed filtration experiments investigated by 3D X-ray computed microtomography, Micron, 2022, Volume 158, Page 103265,

S. Kaur, A. L. Silveira Fiates, K. Rezwan, M. Wilhelm; Monometallic and bimetallic
SiC(O) ceramic with Ni, Co and/or Fe nanoparticles for catalytic applications,
Nanocomposites, 2022, Volume 8, Issue 1, Pages 194-203.

K. Kuhlmann, C. Sinn, J. M. U. Siebert, G. Wehinger, J. Thöming, G. R. Pesch; From μ/span>CT data to CFD: an open-source workflow for engineering applications. Engineering Applications of Computational Fluid Mechanics, 2022, Volume 16(1), 1706-1723.
L. Luhede; Formulation of multiple emulsions in a continuous membrane emulsification process. Dissertationsschrift. Universität Bremen, Bremen, 2022. 9783844088168, 3844088164
G. D. Wehinger, M. Ambrosetti, R. Cheula, Z. D. Ding, M. Isoz, B. Kreitz, K. Kuhlmann, M. Maestri; Quo vadis multiscale modeling in reaction engineering? – A perspective. Chemical Engineering Research and Design, 2022,

P.H. da Rosa Braun, K. Rezwan, M. Wilhelm; Impact of a tert-butyl alcohol-cyclohexane system used in unidirectional freeze-casting of SiOC on compressive strength and mass transport, Materials & Design, 2021, Volume 212, Page 110186,

P.H. da Rosa Braun, T. Canuto de Almeida e Silva, J. Rodrigo Quejigo, A. Kuchenbuch, K. Rezwan, F. Harnisch, M. Wilhelm; Impact of Surface Properties of Porous SiOC‐Based Materials on the Performance of Geobacter Biofilm Anodes. ChemElectroChem, 2021, Volume 8, Issue 5, Pages 850-857.

J. Condi Mainardi, K. Rezwan, M. Maas; Genipin-Crosslinked Chitosan/Alginate/Alumina Nanocomposite Gels for 3d Bioprinting, Bioprocess and Biosystems Engineering, 2021, Volume 44, Issue 11, Pages 1-15.

D. Dutta, J. Markhoff, N. Suter, K. Rezwan, D. Brüggemann; Effect of Collagen Nanofibers and Silanization on the Interaction of HaCaT Keratinocytes and 3T3 Fibroblasts with Alumina Nanopores, ACS Appl. Bio Mater., 2021 4, 2, Pages 1852–1862.

S.C. Endres, L. Colombi Ciacchi, L. Mädler; A review of contact force models between nanoparticles in agglomerates, aggregates, and films, Journal of Aerosol Science, 2021, Volume 153, Page 105719.

S. Fadnavis, S. Endres, Q. Wen, Y.-C. Wu, H. Cheng, S. Koudoro, S. Rane, A. Rokem, E. Garyfallidis; Bifurcated Topological Optimization for IVIM. Frontiers Neuroscience, 2021, 15:779025,

N. C. Fontão, M. Wilhelm, K. Rezwan; Asymmetric polysiloxane-based SiOC membranes produced via phase inversion tape casting. Materials & Design. 2021(198).109328.

J. Ilsemann, M. M. Murshed, T. M. Gesing, J. Kopyscinski, M. Bäumer; On the support dependency of the CO2-methanation – decoupling size and support effects, Catalysis Science & Technology, 2021, Volume 11, Pages 4098-4114.>

Th. Ilzig, D. Schumacher, M. Wilhelm, St. Günther, St. Odenbach; Image data analysis of high resolution μCT data for the characterization of pore orientation and pore space interconnectivity in freeze cast ceramics; Materials Characterization, 2021, Volume 174, Page 110966,

L. Luhede, B. Besser, D. Schumacher, M. Wilhelm, U. Fritsching; Continuous Multistep Encapsulation Process for the Generation of Multiple Emulsions, Chemical Engineering & Technology, 2020, Volume 44, Issue 1, Pages 15-22.

L. Messner, M. M. Hoog Antink, T. Guo, M. Maas, S. Beutel; A versatile ceramic capillary membrane reactor system for continuous enzyme-catalyzed hydrolysis, Engineering in Life Sciences, 2021, Volume 21, Issue 8-9, Pages 527-538.

M. Mirdrikvand, M. Sadeghi, G. R. Pesch, W. Dreher, J. Thöming; Full-Field Comparison of MRV and CFD of Gas Flow through Regular Catalytic Monolithic Structures, Processes, 2021, Volume 9, Issue 3,

S. Swapnasrita; Direct Simulation Monte Carlo: Surface Chemical Reaction.
Dissertationsschrift. Universität Bremen, Bremen, 2021.


V. Ahilan; Porous polymer derived ceramic membranes for bioelectricity generation and wastewater treatment. Dissertationsschrift. Universität Bremen, Bremen, 2020.

J. Bartels; Ceramic capillary membranes with tailored pore sizes and functionalizations for virus retention. Dissertationsschrift. Universität Bremen, Bremen, 2020.

M. M. Hoog Antink, S. Beutel, K. Rezwan, M. Maas; Tailoring Electrostatic Surface Potential and Adsorption Capacity of Porous Ceramics by Silica-Assisted Sintering, Materialia, 2020, Volume 12, Issue 1, Page 100735.

M. M. Hoog Antink; Design of ceramic supports with tailored porous and surface properties for protein immobilization and coral larval settlement. Dissertationsschrift. Universität Bremen, Bremen, 2020.

M. Hornaff, M. Kepper, E. Beckert, E. Prevost, I.Toubhans, F. Descours, R. Eberhardt, A. Tünnermann; Laser-based soldering of a high-resolution optical filter instrument for space applications, Photonic Instrumentation Engineering VII (SPIE),2022,

J. Ilsemann; On the support of the CO2 methanation. Dissertationsschrift. Universität Bremen, Bremen, 2020.

S. Kaur, G. Mônego, K. Rezwan, M. Wilhelm; Synthesis of Porous Ni/SiC(O)‐Based Nanocomposites: Effect of Nickel Acetylacetonate and Poly(Ethylene Glycol) Methacrylate Modification on Specific Surface Area and Porosity, Advanced Engineering Materials, 2020, Volume 22, Issue 4, 1901036.

M. Lorenz, D. Malangré, F. Du, M. Baune, J. Thöming, G. Pesch; High-throughput dielectrophoretic filtration of sub-micron and micro particles in macroscopic porous materials, Anal Bioanal Chem 2020, Volume 412, Pages 3903-3914.

M. Lorenz, A.P. Weber, M. Baune, J. Thöming, G. Pesch; Aerosol classification by dielectrophoresis: a theoretical study on spherical particles. Sci Rep 2020, Volume 10, Page 10617.

M. Lorenz; Dielectrophoretic filtration of particles in porous media: Concept, design, and selectivity. Dissertationsschrift. Universität Bremen, Bremen, 2020.

L. Luhede, B. Besser, D. Schumacher, M. Wilhelm, U. Fritsching; Continuous Multistep Encapsulation Process for the Generation of Multiple Emulsions, Chemical Engineering & Technology, 2020, Volume 44, Issue 1, Pages 15-22,

L. Messner, M. M. Hoog Antink, T. Guo, T., M. Maas, S. Beutel; Enzymatische Hydrolyseprozesse im kontinuierlich betriebenen Keramikkapillarreaktor, Chemie Ingenieur Technik, 2020, Volume 9,

M. Mirdrikvand, M. Sadeghi, M. Nurul Karim, J. Thöming, W. Dreher; Pore-Scale Analysis of Axial and Radial Dispersion Coefficients of Gas Flow in Macroporous Foam Monoliths Using NMR-based Displacement Measurements, Chemical Engineering Journal, 2020, Volume 388, page 124234,

M. Mirdrikvand; NMR methods for the characterization of mass transport and reaction processes in porous material. Dissertationsschrift. Universität Bremen, Bremen, 2020.

R. K. Nishihora, L. Luhede, U. Fritsching, M. G. N. Quadri, D. Hotza, K. Rezwan, M. Wilhelm; Premix membrane emulsification using flat microfiltration inorganic membranes with tailored structure and composition. Journal of Membrane Science, 2020; Volume 608, 118124.

M. Sadeghi, M. Mirdrikvand, G. Pesch, W. Dreher, J. Thöming; Full field analysis of gas flow wthin open cell foams: Comparison of microtomography-based CFD simulations and experimental MRV flow mapping data, Experiments in Fluids, 2020, Volume 61, Article number 124,

D. Schumacher, M. Wilhelm, K. Rezwan; Porous SiOC monoliths with catalytic activity by in situ formation of Ni nanoparticles in solution-based freeze casting, J. Am. Ceram. Soc., 2020, Volume 103, Issue 5, pages 2991-3001,

D. Schumacher, P.H. da Rosa Braun, M. Wilhelm, K. Rezwan; Unidirectional solution-based freeze cast polymer-derived ceramics: influence of freezing conditions and templating solvent on capillary transport in isothermal wicking, J. Mater. Sci., 2020, Volume 55, pages 4157-4169,

D. Schumacher; Porous polymer-derived ceramics by solution-based freeze casting for capillary transport and catalysis. Dissertationsschrift. Universität Bremen, Bremen, 2020.

Th. Silva; Polymer-derived SiOC Ceramics as New Electrode Materials for Microbial Fuel Cell Applications. Dissertationsschrift. Universität Bremen, Bremen, 2020.


V. Ahilan, G. D. Bhowmick, M. M. Ghangrekar, M. M. Murshed, M. Wilhelm*, K. Rezwan; Microbial fuel cell performance of graphitic carbon functionalized porous polysiloxane based ceramic membranes, Bioelectrochemistry, 2019, Volume 129, pages 259-269,

V. Ahilan, G. D. Bhowmick, M. M. Ghangrekar, M. Wilhelm*, K. Rezwan; Tailoring hydrophilic and porous nature of polysiloxane derived ceramer and ceramic membranes for enhanced bioelectricity generation in microbial fuel cell, Ionics, 2019, Volume 25, pages 5907-5918,

J. Bartels, A. G. Batista, S. Kroll. M. Maas, K. Rezwan; Hydrophobic ceramic capillary membranes for versatile virus filtration, Journal of Membrane Science, 2019, Volume 570-571, Pages 85-92.

J. Condi Mainardi, K. Rezwan, M. Maas; Embedding live bacteria in porous hydrogel/ceramic nanocomposites for bioprocessing applications, Bioprocess and Biosystems Engineering, 2019, Volume 42, pages 1215-1224,

M. M. Hoog Antink, T. Sewczyk, S. Kroll, P. Árki, S. Beutel, K. Rezwan, M. Maas; Proteolytic ceramic capillary membranes for the production of peptides under flow, Biochemical Engineering Journal, 2019, Volume 147, pages 89-99.

J. Ilsemann, A. Straß‐Eifert, J. Friedland, L. Kiewidt, J. Thöming, M. Bäumer, R. Güttel; Cobalt@Silica Core‐Shell Catalysts for Hydrogenation of CO/CO 2 Mixtures to Methane, ChemCatChem, 2019, Volume 11, pages 4884-4893,

J. Ilsemann, A. Sonström, T.M. Gesing, R. Anwander, M. Bäumer; Highly Active Sm 2 O 3 ‐Ni Xerogel Catalysts for CO 2 Methanation, ChemCatChem, 2019, Volume 11, pages 1732–1741.

S. Kaur, S. Fischer, J. Falta, K. Rezwan, M. Wilhelm; High surface area SiC(O)‐based ceramic by pyrolysis of poly (ethylene glycol) methacrylate‐modified polycarbosilane, Journal of American Ceramic Society, 2019, Volume 102, pages 7187-7197,

L. Kiewidt, J. Thöming; Pareto-optimal design and assessment of monolithic sponges as catalyst carriers for exothermic reactons, Chemical engineering Journal, 2019, Volume 359, pages 496-504.

L. Luhede, T. Wollborn, U. Fritsching; Stability of multiple emulsions under shear stress, The Canadian Journal of Chemical Engineering, 2019. Volume 98, Issue 1, Pages 186-193.

Y. Ma, D. Zimnik, M. E. Dreyer, Y. Li; Investigation on cryo-wicking performance within metallic weaves under superheated conditions for screen channel liquid acquisition devices (LADs), Int. J. Heat Mass Tran., 2019, Volume 141, pages530-541,

H.P. Macedo, R.L.B.A. Medeiros, J. Ilsemann, D.M.A. Melo, K. Rezwan, M. Wilhelm; Nickel-containing hybrid ceramics derived from polysiloxanes with hierarchical porosity for CO2 methanation, Microporous and Mesoporous Materials, 2019, Volume 278, pages 156–166,

M. Mirdrikvand, H. Ridder, J. Thöming, W. Dreher; Diffusion Weighted Magnetic Resonance Imaging for Temperature Measurement in Catalyst Supports with Axial Gas Flow, Reaction Chemistry & Engineering, 2019, Volume 4, pages 1844-1853,

P. Moni, W. F. Chaves, M. Wilhelm, K. Rezwan; Polysiloxane microspheres encapsulated in carbon allotropes: A promising material for supercapacitor and carbon dioxide capture, Journal of Colloid and Interface Science, 2019, Volume 542, Pages 91-101.

P. Moni, M. G. Pollachini, M. Wilhelm, J. Lorenz, C. Harms, M. M. Murshed, K. Rezwan; Metal-Containing Ceramic Composite with in Situ Grown Carbon Nanotube as a Cathode Catalyst for Anion Exchange Membrane Fuel Cell and Rechargeable Zinc–Air Battery, ACS Applied Energy Materials, 2019, Volume 2, Issue 8, Pages 6078-6086.

S. Oummadi, B. Nait-Ali, A. Arnaud, J. Victor, Y. Launay, M. Mirdrikvand, W. Dreher, K. Rezwan, D. S. Smith; Distribution of water in ceramic green bodies during drying. Journal of the European Ceramic Society, 2019, Volume 39, Issue 10, pages 3164-3172.

D. Schumacher*, D. Zimnik*, M. Wilhelm, M. Dreyer, K. Rezwan; Solution based freeze cast polymer derived ceramics for isothermal wicking - relationship between pore structure and imbibition, Science and Technology of Advanced Materials, 2019, Volume 20, Issue 1, pages 1207-1221,

Th. Silva, G. Dhar Bhowmick, M. M. Ghangrekar, M. Wilhelm, K. Rezwan; SiOC-based polymer derived-ceramic porous anodes for microbial fuel cells, Biochemical Engineering Journal, 2019, Volume 148, pages 29-36,

Th. Silva, M. Mooste, E. Kibena-Põldsepp, L. Matisen, M. Merisalu, M. Kook, V. Sammelselg, K. Tammeveski, M. Wilhelm, K. Rezwan; Polymer-derived Co/Ni–SiOC(N) ceramic electrocatalysts for oxygen reduction reaction in fuel cells, Catalysis Science & Technology, 2019, Volume 9, Pages 854-866.

Th. Silva, V. F. Kettermann, C. Pereira, M. Simoes, M. Wilhelm, K. Rezwan; Novel tape-cast SiOC-based porous ceramic electrode materials for potential application in bioelectrochemical systems, Journal of Material Science, 2019, Vol 54, Issue 8, Pages 6471–6487.

S. Swapnasrita, G. R. Pesch, J.A.H. Dreyer, N. Riefler, T. Wriedt, L. Mädler; Implementation of parcel method for surface reactions in DSMC, Computers & Fluids, 2019, Volume 187, Pages 1-11.

L. Weirauch, M. Lorenz, N. Hill, B. H. Lapizco-Encinas, M. Baune, G. R. Pesch, J. Thöming; Material-selective separation of mixed microparticles via insulator-based dielectrophoresis. Biomicrofluidics, 2019, Volume 13, page 064112,

T. Wollborn, L. Luhede, U. Fritsching; Evaluating interfacial shear and strain stress during droplet deformation in micropores, Physics of Fluids, 2019, Volume 31, 012109.


V. Ahilan, M. Wilhelm, K. Rezwan; Porous Polymer Derived Ceramic (PDC)-Montmorillonite-H3PMo12O40/SiO2 Composite Membranes for Microbial Fuel Cell (MFC) Application, Ceramics International 2018, Volume 44, Issue 16, pages 19191-19199,

J. Bartels, N. Hildebrand, M. Nawrocki, S. Kroll, M. Maas, L. Colombi Ciacchi, K. Rezwan; Effect of divalent versus monovalent cations on the MS2 retention capacity of amino-functionalized ceramic filters, Phys. Chem. Chem. Phys., 2018, Volume 20, Page 11215-11223.

M. M. Hoog Antink, L. Röpke, J. Bartels, C. Soltmann, A. Kunzmann, K. Rezwan, S. Kroll; Porous ceramics with tailored pore size and morphology as substrates for coral larval settlement, Ceramics International, 2018, Volume 44, Issue 14, pages 16561-16571,

J. Kiefer, J. Bartels, S. Kroll, K. Rezwan; Vibrational Spectroscopy as a Promising Toolbox for Analyzing Functionalized Ceramic Membranes, Applied Spectroscopy, 2018, Volume 72, Issue 6, Pages 947-55.
M. Mirdrikvand, J. Ilsemann, J. Thöming, W. Dreher; Spatially Resolved Characterization of the Gas Propagator in Monolithic Structured Catalysts Using NMR Diffusiometry, Chemical Engineering Technology, 2018, Volume 41, pages 1871–1880,
G. R. Pesch; On the dielectrophoretic particle retention in porous media. Dissertationsschrift. Universität Bremen, Bremen, 2018.
G. R. Pesch, M. Lorenz, S. Sachdev, S. Salameh, F. Du, M. Baune, P. E. Boukany, J. Thöming; Bridging the scales in high-throughput dielectrophoretic (bio-)particle separation in porous media. Scientific Reports, 2018, Volume 8(1), page 10480,


D. Schumacher, M. Wilhelm, K. Rezwan; Modified solution based freeze casting process of polysiloxanes to adjust pore morphology and surface functions of SiOC monoliths, Materials & Design, 2018, Volume 160, pages 1295-1304
T. Sewczyk, M. M. Hoog Antink, M. Maas, S. Kroll, S. Beutel; Flow rate dependent continuous hydrolysis of protein isolates, AMB Express, 2018, Volume 8(1), page 18.
M.A. Worsley, J. Ilsemann, Th. M. Gesing, V. Zielasek, A.J. Nelson, R.A.S. Ferreira, L.D. Carlos, A.E. Gash, M. Bäumer; Chlorine-free, monolithic lanthanide series rare earth oxide aerogels via epoxide-assisted sol-gel method, Journal of Sol-Gel Science and Technology, 2018, Volume 89, pages 1–13
H. Zhang; Macroporous Polymer-Derived Ceramic Monoliths for Cryogenic Applications Manufactured by Water-Based Freeze Casting. Dissertationsschrift. Universität Bremen, Bremen, 2018.
B. Besser; Gas diffusion in functionalized mesoporous membranes. Dissertationsschrift. Universität Bremen, Bremen, 2017.>
B. Besser, S. Malik, M. Baune, S. Kroll, J. Thöming, K. Rezwan; The influence of the functional group density on gas flow and selectivity: Nanoscale interactions in alkylfunctionalized mesoporous membranes, Microporous Mesoporous Materials, 2017, Volume 237, pages 38-48,
T. Bollhorst; Self-assembly of submicron-sized colloidal capsules from inorganic nanoparticles. Dissertationsschrift. Universität Bremen, Bremen, 2017.
K. Gajda, M. Baune, J. Thöming; Recycling options for steel working slag and upcycling perspectives; Procedia Manufacturing, 2017, pagesspan lang="EN-GB"> 643-648,
Y. Grebenyuk; Experimental and theoretical investigations of wicking in porous media. Dissertationsschrift. Universität Bremen, Bremen, 2017. ISBN: 3736997272, 9783736997271

Y. Grebenyuk, H. X. Zhang, M. Wilhelm, K. Rezwan, M. Dreyer; Wicking into porous polymer-derived ceramic monoliths fabricated by freeze-casting, Journal of the European Ceramic Society, Volume 37, Issue 5, May 2017, pages 1993-2000,

G. Hollermann, R. Dhekane, S. Kroll, K. Rezwan; Functionalized porous ceramic microbeads as carriers in enzymatic tandem systems, Biochemical Engineering Journal, 2017, Volume 126, Suplement C, pages 30-39,

L. Huang; Nuclear Magnetic Resonance Methods for Characterization of Mass Transport in Porous Materials. Dissertationsschrift. Universität Bremen, Bremen, 2017.

L. Huang, G. Mikolajczyk, E. Küstermann, M. Wilhelm, St. Odenbach, W. Dreher; Adapted MR velocimetry of slow liquid flow in porous media, Journal of Magnetic Resonance, 2017, Volume 276, pages 103–112,

L. Kiewidt; Solid sponges as support for heterogeneous catalysts in gas-phase reactions. Dissertationsschrift. Universität Bremen, Bremen, 2017.

V. Lauth; Calcium carbonate colloidal particles as delivery vehicles to biological systems. Dissertationsschrift. Universität Bremen, Bremen, 2017.>
V. Lauth, M. Maas, K. Rezwan; An Evaluation of Colloidal and Crystalline Properties of CaO3 Nanoparticles for Biological Applications; Materials Science and Engineering, 2017, Volume 78, pages 305-314,
G. Mikolajczyk; Kombination von Röntgentomographie und Magnetresonanz-tomographie zur experimentellen Untersuchung von Tiefenfiltrationprozessen. Dissertationsschrift. TU Dresden, Dresden, 2017. ISBN: 978-3-95908-129-0.
G. Mikolajczyk, L. Huang, M. Wilhelm, W. Dreher, S. Odenbach; Colloid deposition in monolithic porous media – Experimental investigations using X-ray computed microtomography and magnetic resonance velocimetry; Chemical Engineering Science; 2017,

P. Moni, M. Wilhelm, K. Rezwan; The Influence of Carbon Nanotubes and Graphene Oxide Sheets on the Morphology, Porosity, Surface Characteristics and Thermal and Electrical Properties of Polysiloxane Derived Ceramics, RSC Advances, 2017, Volume 7, pages 37559 – 37567,

G. R. Pesch, F. Du, M. Baune, J. Thöming; Influence of geometry and material of insulating posts on particle trapping using positive dielectrophoresis, Journal of Chromatography A., Volume 1483, 3 February 2017, pages 127-137, 
J. Ulpts, L. Kiewidt, W. Dreher, J. Thöming; 3D characterisation of gas phase reactors with regulary and irregulary structured monolytic catalysts by NMR imaging and modeling, Catalysts Today, 2017,
H. X.  Zhang, C. Fidelis, A. L. Serva, M. Wilhelm, K. Rezwan; Water-based freeze casting: Adjusting hydrophobic polymethylsiloxane for obtaining hierarchically ordered porous SiOC, Journal of the American Ceramic Society, 2017, pages 1-12,
H. X.  Zhang, C. Fidelis, M. Wilhelm, Z. Xie, K. Rezwan; Macro/mesoporous SiOC ceramics of anisotropic structure for cryogenic engineering, Materials & Design,2017, Volume 134, pages 207-217,
J. Bartels, M. Souza, A. Schaper, Á. Pál, S. Kroll, K. Rezwan; Amino-functionalized ceramic capillary membranes for controlled virus retention, Environmental Science and Technology, 2016, Volume 50, Issue 4, pages 1973 - 1981, 5b05124.
B. Besser, A. Ahmed, M. Baune, S. Kroll, J. Thöming, K. Rezwan; Applying alkyl-chain surface functionalizations in mesoporous inorganic structures: Their impact on gas flow and selectivity depending on temperature, American Chemical Society -  Applied Materials & Interfaces, 2016, pages 26938-26947,
B. Besser, H. A. Tajiri, G. Mikolajczyk, J. Möllmer, T. Schumacher, S. Odenbach, R. Glaeser, S. Kroll, K. Rezwan; Hierarchical porous zeolite structures for pressure swing adsorption applications, American Chemical Society- Applied Materials & Interfaces, 2016, Volume 8, Issue 5, pages 3277-86,

C. Brandes, M. H. Antink, S. Kroll, L. Treccani, K. Rezwan; "Aluminium acetate as alternative cross-linker for temperature controlled gel casting and joining of ceramics", Journal of the European Ceramic Society, 2016, 36, pages 1241-1251.
W. Dreher, I. Bardenhagen, L. Huang, M. Bäumer; On the suppression of background signals originating from NMR hardware components. Application to zero echo time imaging and relaxation time analysis; Magnetic Resonance Imaging 34, 2016, pages 264–270,
W. Feng, T. Wriedt, L. Mädler; Design of an elliptical mirror system with high dynamic range for characterization of surface properties using BRDF data at 532 nm in T. Wriedt (editor): Light scattering by particle: Theoretical and Practical Aspects, 2016, epubli, Berlin, pages 74-84
S.Galic, C. Brandes, M. Hoog Antink, S. Kroll, K. Rezwan; ARBOCEL Cellulose Particles as Pore Creators for Ceramics, Ceramic Formu International, 2016. 11-12/2016, pages 29-32,
I. Graur, J. G. Méolans, P. Perrier, J. Thöming, T. Veltzke; A physical explanation of the gas flow diode effect; Microfluidics and Nanofluidics, 2016, Volume 20, Issue 10, page 145,
Y. Grebenyuk, M. Dreyer; Wicking of Liquid Nitrogen into superheated porous structures, Cryogenics, 2016, pages 27-39,
U. Hess, G. Mikolajczyk, L. Treccani,  P. Streckbein, C. Heiss,  S. Odenbach, K. Rezwan;  Multi-loaded ceramic beads/matrix scaffolds obtained by combining ionotropic and freeze gelation for sustained and tuneable vancomycin release  Materials Science and Engineering: C 2016, Volume 67, pages 542-553,
P.D. Krummrich, P. Schneider, T. Hochrainer; Experimental validation of rve based failure simulations of macro-porus materials. Proceedings in Applied Mathematics and Mechanics, 2016, Volume 16, Issue 1, pages 365-366,
V. Lauth, B. Loretz, C.-M. Lehr, M. Maas*, K. Rezwan;  Self-assembly and shape control of hybrid nanocarriers based on calcium carbonate and carbon nanodots,  Chemistry of Materials, 2016, Volume 28, page 3796,
G. R. Pesch, L. Kiewidt, F. Du, M. Baune, J. Thöming; Electrodeless dielectrophoresis: Impact of geometry and material on obstacle polarization, Electrophoresis, 2016, Volume 37, Issue 2, pages 291–301,
F. Schlüter, J. Meyer, M. Wilhelm, K. Rezwan; Hierarchical emulsion based hybrid ceramics synthesized with different siloxane precursor and with embedded nickel nanoparticles, Colloids and Surfaces A: Physicochemical Engineering Aspects, 2016, Volume 492, pages 160–169,
M. Schubert; Neuartige Kobaltkatalysatoren für die CO2-Methanisierung. Dissertationsschrift. Universität Bremen, Bremen, 2016.
M. Schubert, S. Pokhrel, A. Thome, V.  Zielasek, T. M. Gesing, F.  Roessner, L.  Mädler, M. Bäumer; Highly active Co-Al2O3-based catalysts for CO2 methanation with very low platinum promotion prepared by double flame spray pyrolysis. Catalysis Science & Technology,, 2016, Volume 6, pages 7449-7460, /span>
M. Schubert, L.  Schubert, A.  Thome, L.  Kiewidt, C.  Rosebrock, J.  Thöming, F.  Roessner, M. Bäumer; Coatings of active and heat-resistant cobalt-aluminium xerogel catalysts. Journal of Colloid and Interface Scieence, 2016, Volume 477, pages 64-73,

M. Schubert, M. Wilhelm, S. Bragulla, Ch. Sun, S. Neumann, Th. Gesing, P. Pfeifer, K. Rezwan, M. Bäumer; The influence of the pyrolysis temperature on the material properties of Cobalt and Nickel containing precursor derived ceramics and their catalytic use for CO2 methanation and Fischer-tropsch synthesis, Catalysis letter, 2016, pages 1-11,>

J. Ulpts, W. Dreher, L. Kiewidt, M. Schubert, J. Thöming; In situ analysis of gas phase reaction processes within monolithic catalyst supports by applying NMR imaging methods, Catalysis Today, 2016, Volume 273, pages 91–98
T. Veltzke, F. Pille, J. Thöming; Delayed binary and multicomponent gas diffusion in conical tubes; Chemical Engineering Science,  2016, Volume 148, pages 93-107, 1-11.
Y. Wang, F. Du, G. Pesch, J. Köser, M. Baune, J. Thöming; Microparticle trajectories in a high-throughput channel for contact-free fractionation by dielectrophoresis, Chemical Engineering Science, 2016, Volume 153, pages 34-44,
W. Wesseling, M. Lohmeyer, S. Wittka, J. Bartels, S. Kroll, C. Soltmann, P. Kegler, A. Kunzmann, S. Neumann, B. Ramsch, B. Sellner, F. Meinhardt; Adverse Effects of Immobilised Pseudoalteromonas on the Fish Pathogenic Vibrio anguillarum: An In Vitro Study, Journal of Marine Biology, 2016, pages 1-11,
H.X. Zhang, P. D’Angelo Nunes, M. Wilhelm, K. Rezwan: Hierarchically ordered micro/meso/macroporous polymer-derived ceramic monoliths fabricated by freeze-casting,  Journal of the European Ceramic Society, 2016, Volume 36m, Issue 1, pages 51-58,
B. Besser, T. Veltzke,  J. A. Dreyer, J. Bartels, M. Baune, S. Kroll, J. Thöming, K. Rezwan: A comparative experimental study on the deviation of the ideal selectivity in HDTMS-functionalized and untreated ceramic structures with pores in the upper mesoporous range. Microporous and Mesoporous Materials, 2015, Volume 217, pages 2253-261>.

T. Bollhorst, S. Shahabi, K. Wörz, C. Petters, R. Dringen, M. Maas, K. Rezwan:  Bifunctional submicron colloidosomes coassembled from fluorescent and superparamagnetic nanoparticles, Angewandte Chemie International Edition, 2015, Volume 54, Issue 1, pages 118–123,

W. Feng, J. Hellmers, V. Schmidt, T. Wriedt: A review and analysis of BRDF measurement systems, in: T. Wriedt (editor): Light Scattering by Complex Particles, 2015, epubli, Berlin, pages 88-98
I. Graur, T. Veltzke, J. G. Méolans, M. T. Ho, J. Thöming: The gas flow diode effect: Theoretical and experimental analysis of moderately rarefied gas flows through a micro channel with varying cross section. Microfluid. Nanofluid., 2015, Volume 18, pages 391-402,
L. Kiewidt, J. Thöming: Predicting optimal temperature profiles in single-stage fixed-bed reactors for CO2-methanation, Chemical Engineering Science, 2015, Volume 132, pages 59-71,
R. Mueller, S. Zhang, M. Klink, M. Bäumer, S. Vasenkov: The origin of a large apparent tortuosity factor for the Knudsen diffusion inside monoliths of samaria-alumina aerogel catalyst: a diffusion NMR study Phys. Chem. Chem. Phys., 2015, Volume 17, pages 27481-27487,
F. Schlüter, M. Wilhelm, K. Rezwan: Surfactant assisted syntheses of monolithic hybrid ceramics with hierarchical porosity, Journal of the European Ceramic Society, 2015, Volume 35, Issue 11, pages  2963-2972,
K. Skorupski, J. Hellmers, W. Feng, J. Mroszka, T. Wriedt, L. Mädler: Influence of sintering necks on the spectral behavior of ITO clusters using the Discrete Dipole Approximation. Journal of Quantitative Spectroscopy and Radiative Tranfer, 2015, Volume 159, pages 11-18,
 L. Szalmás, T. Veltzke, J.Thöming: Analysis of the diodic effect of flows of rarefied gases in tapered rectangular channels; Vacuum, 2015, Volume 120, pages 147–154,
J. Ulpts, W. Dreher, M. Klink, J. Thöming: NMR imaging of gas phase hydrogenation in a packed bed flow reactor. Applied Catalysis a-General, 2015, Volume 502, pages 340-349,
T. Veltzke, L. Kiewidt, J. Thöming: Multicomponent Gas Diffusion in Nonuniform Tubes, AIChE Journal, 2015, Volume 61, Issue 4, pages 1404-1412,
W. Feng, J. Hellmers, V. Schmidt, L. Mädler, T. Wriedt: Light scattering by two spherical particles and its dependence on interparticle distance, in: T. Wriedt, Y. Eremin. (editors): Scattering by Aggregates on surfaces, epubli, Berlin, 2014, pages 36–42.
W. Feng, J. Hellmers, V. Schmidt, L. Mädler, T. Wriedt: Light scattering by two spherical particles and its dependence on interparticle distance. Proc 10th Int. Conf. Series on Laserlight and Interactions with Particles, 25.-29.08.2014, Marseille, Frankreich, F. Onofri, B. Stout (Hrsg.), 2014, S. PL-4.1-PL-4.3.
V. Lauth, M. Maas, K. Rezwan; Coacervate-directed synthesis of CaCO3 microcarriers for pH-responsive delivery of biomolecules, Journal of Materials Chemistry B, 2014, Volume 2, Pages7725-7731.
G. R. Pesch, F. Du, U. Schwientek, C. Gehrmeyer, A. Maurer, J. Thöming, M. Baune:  Recovery of submicron particles using high-throughput dielectrophoretically switchable filtration, Separation and Purification Technology, 2014, Volume 132, pages 728–735,
J. Werner, B. Besser, C. Brandes, S. Kroll, K. Rezwan: Production of ceramic membrane with different pore sizes for virus retention, Journal of Water Process Engineering, 2014, Volume 4, pages 201-211,
P. Kaempfe, V. R. Lauth, T. Halfer, L. Treccani, M. Maas, K. Rezwan; Micromolding of Calcium Carbonate Using a Bio-Inspired, Coacervation-Mediated Process, Journal of the American Ceramic Society, 2013, Volume 96, Issue 3, Pages 736-742.